Zippy R2U-6300F(LH) User Manual
Page 24
1503/09/02
power cords, wait for 2 ~ 3 minutes for releasing the protection
state, then test it again.
d. If buzzer still sound or the LED shows power module is
defective, please locate which power module is defective,
perform hot-swap procedure (please refer to the Sec. 1.9
Hot-swap procedures), sent the defective power module to
your vendor for RMA operation.
e. If you can not fix the problem, please contact with your
vendor for supporting.
Note:
*The description stated herein is subject to change without prior notice.
*All brand names and trademarks are the property of their respective
owners.
program files/Manual/R2U
This manual is related to the following products: