Zippy HG2-6400P - Manual (Page 12)

User Manual for Models HG2, HP2, PSM and PSL. Version 1.0
Page 12/17
INPUT CHARACTERISTICS: PSL-6720P/6800P/6850P
VOLTAGE: 90 ~ 264 VAC FULL RANGE.
FREQUENCY: 47 ~ 63 Hz.
INPUT CURRENT: 5A (RMS) FOR 220 VAC
12A (RMS) FOR 110 VAC
INRUSH CURRENT: 75A MAX. FOR 110 VAC
150A MAX. FOR 220 VAC
OUTPUT CHARACTERISTICS:
OUTPUT CURRENT
(A)
REGULATION OUTPUT
VOLTAGE
MIN. MAX. PEAK LOAD LINE
OUTPUT RIPPLE &
NOISE MAX. [P-P]
+5V 0.5 45 ± 5% ±1% 60mV
+12V 2 52/60/60
± 5% ±1%
120mV
-5V 0 0.8
±5% ±1%
120mV
-12V 0 0.8
±5% ±2%
120mV
+3.3V 0.5 30
±5% ±2%
60mV
+5VSB 0 3.5
±5% ±1%
60mV
REMARK: 1. TOTAL OUTPUT OF +5V AND +3.3V NOT EXCEED 230W
2. TOTAL MAX.OUTPUT 720W / 800W / 850W
SPECIFICATION:
TEMPERATURE RANGE: OPERATING 0 0 C --- 50 0 C
HOLD UP TIME: 17mS MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE
EFFICIENCY: 71% TYPICAL AT FULL LOAD
POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
OVER POWER PROTECTION
OVER VOLTAGE PROTECTION
OVER CIRCUIT PROTECTION
SHORT CIRCUIT PROTECTOIN
EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
COOLING: 8 0mm DC FANS
DIMENSION: 220 (D) x 150 (W) x 86 (H) mm