Workrite Fundamentals EX Electric Assembly Instructions for 2-leg Workcenters 54”–72” Wide - Manual (Page 7)

Workrite Ergonomics | 800.959.9675 www.workriteergo.com 7 of 8
Workrite Fundamentals Workcenters - Assembly Instructions for 2-leg Tables, 54”–72” Wide
Connect Leg Cables to Control leg and Companion Leg
Connect the Leg Cable (N) to the six position connector labeled ”1” on both the Control Leg and the
Companion Leg (G).
Insert the Power Cord (R) into the two position connector labeled “DC” on the Control Leg.
Insert the Switch Cable (O) into the data connector labeled “A1” on the Control Leg.
Attach Cable Spools and Cable Loops
Attach Cable Spool (P) with the #12 × ¾"Pan Head Laminate screw (K) and Cable Loops (Q) to
underside of worksurface using #8 × ⅝"Pan Head Screw (L) making sure to wrap the Cable Loop
around the cable prior to attaching. If you do NOT have a Workrite worksurface, mount cable
spools in a convenient location between legs and control box.
7
8
L
Q
Q
P
Q
Q
P
O
R
N
N
L