Workrite Fundamentals EX Electric Assembly Instructions for 2-leg Workcenters 54”–72” Wide - Manual (Page 4)

4 of 8 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Workrite Fundamentals Workcenters - Assembly Instructions for 2-leg Tables, 54”–72” Wide
Attach Base to Worksurface and Tighten Screws
If you do not have a Workrite
worksurface skip to step 4
If you have a Workrite worksurface:
Position leg assemblies to align mounting
holes in brackets to pre-drilled holes in
Top (A) then attach loosely using Pan
Head Top Screws (K). If you use an
electric screwdriver, be sure it is on the
lowest torque setting to avoid stripping
the holes in the top.
Tighten all screws connecting
brackets to leg assemblies.
Then tighten all screws attaching
brackets to top.
Continue to Step 5 .
3
a
a
b
c
3 screws per Short Bracket
5 screws per Long Bracket
4 screws per
End Bracket
K
K
B
C
A
E
K