Parts listing, Sonoma series, Premium workcenters – Workrite Sonoma Series PREMIUM Assembly Instructions User Manual
Page 2

1450 Technology Lane • Petaluma, CA 94954 • 800-959-9675 • www.workriteergo.com
Page 2
1500068 • Rev. C
Sonoma Series
™
PREMIUM Workcenters
1450 Technology Lane • Petaluma, CA 94954 • 800-959-9675 • www.wrea.com
Page 2
PARTS LISTING
Top (size and shape differ for each model)
If Workrite is not supplying the top, it is installer’s
responsibility to position the base under the worksurface
to provide maximum stability.
Leg Assemblies (2 or 3)
Top Brackets (2 or 3)
Foot caps (4 or 6)
Control Box
Control Panel with
2 attachment screws
Cables (2 or 3)
Power Cord
Crossbar (1 or 2)
Crossbar Brackets (2 or 3)
Crossbar Bracket for
center leg if a three
leg table
Stiffening Brackets (2)
For two leg tables
only
Leveling Glides (4 or 6)
Feet (2 or 3)
5/32” Allen Wrench
3/4” Button Head
machine screws (12 or 20)
and lock washers (12 or 20)
Wood screws (24 or 28)
Top Bracket for center
leg if a three leg table
Velro Cable Strap
(1 per leg)
Cable Spool &
#8 x1” wood screw
(1 per leg)
NOTE: The quantities listed vary depending
on whether it is a two or three leg table
Nuts and
lock washers
are already
threaded
onto studs
Acorn Nuts (2)
For three leg tables only