Workrite Series VALUE Assembly Instructions for Tables with Right Front Crank - Manual (Page 10)

10 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Sonoma Series™ VALUE Workcenters - Assembly Instructions for Tables with Right Front Crank
13
Final Step
Flip table over and adjust Leveling
Glides if required so that table is
steady and does not rock.
Pull out and turn handle to raise
or lower table.
Replacement Part Numbers
Center Leg Crossbar (Z-Bend) Bracket ............5513915 1
Center Leg Foot - Graphite .............................6400264 1
Silver ................................6400263 1
Center Leg Top Bracket .................................5512974 1
Crank Handle Assembly .................................6100078
Crank Tube ..................................................6000004-xx.xxx" (consult factory for length)
Crossbar - Graphite ......................................6000002-xx" (consult factory for length)
Silver ..........................................6000001-xx" (consult factory for length)
Foot Cap .....................................................3500088
Hardware Kit ................................................4200101 (all screws and washers, and Allen wrench)
Hex Shaft Kit ...............................................4206668
Leg 1 - Graphite ...........................................6500006
Silver ...............................................6500005
Leg 2 - Graphite ...........................................6500008
Silver ...............................................6500007
Leg 3 - Graphite ...........................................6500010 1
Silver ...............................................6500009 1
Leveling Glide ..............................................3300252
Side Leg Crossbar Bracket .............................5512863
Side Leg Foot (20") - Graphite ........................6400266
Silver ...........................6400265
Side Leg Top Bracket .....................................5512972
Stiffener Bracket - Graphite ...........................5500104-02 2
Silver ...............................5500104-01 2
1 - Applies to 3-Leg Tables only
2 - Applies to 2-Leg Tables only