Coway CPE-06ALB - Manual (Page 24)

23
FILTER REPLACEMENT METHOD
1 . Close the main water supply valve after unplugging the power cord and
drain the water inside of the internal water tank of the water filtration
device (see p19) .
2 . Open the top cover and loosen the fixing screw at the top of the product .
Open the front cover and disconnect the connected cable completely .
- Open the top cover by sliding it backwards.
- Hold and pull the front cover in the direction of 1. Pull the front cover in the
direction of 3 while sliding the front cover in the direction of 2 to unlock the
latch in the center on the left. Unlock the latch on the right according to the same
method. Then the front cover is separated completely.
Tips