Coway CPE-06ALB - Manual (Page 19)

18
M
ain
tenanc
e
iNST
A
ll
AT
iON
Be cautious!
 Water filtration device installation place 1
Please install the water filtration system not at a rough place, a damp
place, a place where the unit is exposed to the direct sunlight, a
place where dust is present, or a place that the water drops.
 Water filtration device installation place 2
Please install at the place where it is 10 cm or more off from the wall
and the bottom is flat and firm.
 After installing the water filtration system
Filtered water: Fill the water tank with the filtrated water and remove
the water twice or more if necessary after installing it.
Ion water: Fill the water tank with the ionized water and remove the
water twice or more if necessary after installing it.
Removing moisture: Remove moisture and dust from the operating,
display and connecting parts of the front cover.
 Cold water plumbing
Please connect to the cold water pipe necessarily. (If you connect to
the warm water pipe, the filter can be damaged.)
 movement and installation
When the position is moved, connect the power cord when 30
minutes passes after installing.
To maintain optimal product performance, consult a Coway engineer for the detailed
installation methods.
There may be some water remaining inside of the filter which was used to test the
product during inspection process at the factory.
Please feel at easy and use as it isn’t the used product.
Don’t reuse the main water supply valve and hose that was previously
used when you install the product.
Tips
Cold water
plumbing