beautypg.com

Radio operations, English, Turning on/off the loudness – Clarion VRX633R User Manual

Page 14: Ct (clock time) function, Basic operations, Listening to the radio, Tuning, Seek tuning

background image

18

VRX633R

English

Owner

’s manual

Turning on/off the loudness

The loudness effect emphasizes the bass and
treble to create a natural sound tone. When you
are listening to music at a low volume, it is rec-
ommended to use the loudness effect.

This function is enabled only when the panel is
open.

1. Press the A-M button

for 1 second or longer

to select Loudness ON. The “LD” indicator
lights in the display.

2. Press the A-M button

for 1 second or longer

to select Loudness OFF. The “LD” indicator
goes off.

CT (Clock Time) function

The CT function receives CT data sent from an
RDS station and displays the time. Press the
DISP button

@

to switch to CT display.

If CT is not being received, “CT--:--” appears in
the display.

Note:
• CT data is not transmitted in some countries and

by some broadcast stations. Also, in some areas,
the CT may not be displayed accurately.

Basic Operations

Radio Operations

Listening to the radio

1. Press the FNC button

1

and select the RA-

DIO mode. The frequency or PS is displayed.

PS: Programme service name

2. Press the BND button

%

and select the radio

band. Each time the button is pressed, the
radio reception band changes in the follow-
ing order:

FM1

FM2

FM3

AM (MW/LW)

FM1...

3. Press the right or left side of the SEARCH but-

ton

2

to tune in the desired station.

Tuning

There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.

Seek tuning

There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.

DX SEEK can tune in to receivable broadcast
stations; LOCAL SEEK can tune in to only broad-
cast stations with a good reception condition.

1. Press the BND button

%

and select the de-

sired band. (FM or AM (MW, LW))

2. Tune in to a station.

If “MANU” is lit in the display (or when the panel

is closed, if the indicator “SRCH” is not lit) press
and hold the BND button

%

for 1 second or

longer. “MANU” in the display goes off (or when
the panel is open the indicator “SRCH” lights)
and seek tuning is now available.

If “TA” is lit in the display, TP stations are auto-

matically sought.

DX SEEK

Press the right or left side of the SEARCH
button

2

to automatically seek a station.

When the right side of the SEARCH button

2

is pressed, the station is sought in the di-

rection of higher frequencies; when the left
side of the SEARCH button

2

is pressed, the

station is sought in the direction of lower fre-
quencies.

When seek tuning starts, “DX SEEK” appears

in the display.

LOCAL SEEK

If you press and hold the right or left side of
the SEARCH button

2

for 1 second, local

seek tuning is carried out. Broadcast stations
with good reception condition are selected.

When local seeking starts, “LO SEEK” appears

in the display.