beautypg.com

840a class xd integrated amplifier, Important safety instructions – Cambridge Audio 840A User Manual

Page 5

background image

840A Class XD integrated amplifier

Azur Class XD integrated amplifier 5

IMPORTANT SAFETY INSTRUCTIONS

Please take a moment to read these notes before installing your Azur

amplifier, they will enable you to get the best performance and prolong

the life of the product. We advise you follow all instructions, heed all

warnings and keep the instructions for future reference.

The unit is of Class 1 construction and must be connected to a Mains

socket outlet with a protective earthing connection.

Only use the specified attachments/accessories with this unit.

Do not defeat the safety purpose of the polarized or grounding type plug.

A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The

wide blade or third prong are provided for your safety. If the provided

plug does not fit your outlet, consult an electrician for replacement of

the obsolete outlet.

The unit must be installed in a manner that makes disconnection of the

mains plug from the mains socket outlet (or appliance connector from the

rear of the unit) possible. Where the mains plug is used as the disconnect

device, the disconnect device shall remain readily operable. Protect the

power cord from being walked on or pinched particularly at plugs,

convenience repectacles, and the point where they exit from the unit.

This unit must be installed on a sturdy, level surface. Do not

place in a sealed area such as a bookcase or in a cabinet. Any

space open at the back (such as a dedicated equipment rack)

is fine however. When a cart is used, use caution when moving

the cart to avoid injury from tip-over.

Please ensure there is ample ventilation (at least 10cm clearance all

round). Do not put any objects on top of this unit. Do not situate it on a

rug or other soft surface and do not obstruct any air inlets or outlet

grilles. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that produce

heat. Do not stack multiple units on top of each other. Do not place in

an enclosed area such as a bookcase or in a cabinet without sufficient

ventilation.

WARNING - To reduce the risk of fire or electric shock, do not expose this

unit to rain or moisture. This unit must not be used near water or

exposed to dripping or splashing water or other liquids. No objects filled

with liquid, such as vases, shall be placed on the unit. In the event,

switch off immediately, disconnect from the mains supply and contact

your dealer for advice.

Ensure that small objects do not fall through any ventilation grille. If this

happens, switch off immediately, disconnect from the mains supply and

contact your dealer for advice.

To turn the unit off completely switch off on the rear panel. If you do not

intend to use this unit for a long period of time, unplug it from the mains

socket. Unplug this unit during lightning storms.

To clean the unit, wipe its case with a dry, lint-free cloth. Do not use any

cleaning fluids containing alcohol, ammonia or abrasives. Do not spray

an aerosol at or near the amplifier.

This unit is not user serviceable, never attempt to repair, disassemble or

reconstruct the unit if there seems to be a problem. Servicing is required

when the unit has been damaged in any way, such as power-supply cord

or plug is damaged, liquid has been spilled or objects have fallen into it,

the unit has been exposed to rain or moisture, does not operate

normally or has been dropped. A serious electric shock could result if

this precautionary measure is ignored.

This unit should be installed on a sturdy, level surface. Due to stray

magnetic fields turntables or CRT TV’s should not be located nearby due

to possible interference.