ClearSounds 40XLC - Manual (Page 23)

23
Battery Low Indicator
The battery power level icon is display on the screen when the AC adapter is not plugged
in or during a power outage. This will let you see the status of battery power. As the
batteries drain, the lines on the icon will disappear
(See figure #32). When your AC adapter
is plugged in or power is restored, you will see a plug icon rather than a battery icon (See
figure #33) .
Message Waiting
If you have Voice Mail Service from your local phone company, your 40XLC Phone will
display MESSAGE WAITING if a recorded message has been left
(See figure #34) . The
Message Indicator light (See page #28) will flash until the message is retrieved.
Viewing Incoming Calls
If you subscribe to Caller ID service with your local phone service provider, this phone
stores all incoming calls with valid Caller ID information in the call history. Your LCD screen
will display the time and date, the caller’s phone number and name (if they are sent with
the call) as well as a count number
(See figure #35). New calls are assigned a number
from 1 to 99. The most recent call will have the highest number. The call history numbers
appear in the upper right hand corner next to the time and date. New (un-reviewed) call
information shows NEW in the display. With each new call it will automatically turn on the
“New Calls / Message Waiting Indicator”, which is a small red light located on the lower
right-side of the phone’s visual ringer (next to the envelope icon).
NOTE: You must follow the instructions in “Set Area Code / LDS (Long Distance
Service) Code” for your phone to properly recognize and dial calls out of the Caller ID
stored calls
(see page #27). You must program your area code so your phone can properly
recognize and dial calls.
Figure #33
AC Power Indicator
Figure #30
Total & New Calls
Figure #31
No Call
Figure #32
Battery Power Indicator
Figure #34 – Message Waiting
Call Counter