ClearSounds 40XLC User Manual

Page 14

To program your one-touch memory dial buttons please follow instructions below:

1. Lift the handset.
2. Press

the

PROG (program) button

(See figure #13).

3. Using the keypad, dial the number you would like to save, including “1” and the area

code (if applicable).

(See figure #14)

4. Press one of the Priority or Memory Dial buttons (M1 – M8) located on top of the

phone

(See figure #15)

. Each button can be programmed (or reprogrammed using

the same procedure) for a phone number.

5. The Caller ID Screen will display <>

(See figure #16).

6. To register your stored phone numbers, use the phonebook insert card located

under the base.

NOTE: Numbers will be lost if the phone is not receiving any power, either through the
phone line, batteries, AC adapter during a storm, power outage or if you disconnect the
phone. Entering a new number in the same location will automatically erase the previous
number.

If at any time you have questions about your telephone please contact our ClearSounds
Customer Service Department at: 1-800-965-9043.

Figure #16

LCD Display

Figure #13

Program Button

Figure #15

Memory / Priority Buttons

Figure #14

Telephone Keypad