Vinten Radamec Quattro SE Pedestal - Manual (Page 13)

11
Usage
The Quattro-SE Pedestal is designed for use in virtual television studios to support and balance a pan and tilt
head, camera and ancillary equipment weighing up to 80 kg (176.4 lb).
The Quattro-SE Pedestal is intended for use by television camera operators.
Further information
For further information or advice regarding this pedestal, please contact Vinten Radamec or your local Vinten
Radamec distributor (see back cover) or visit our website. For full details on maintenance and spare parts,
please refer to the Quattro-SE Pedestal Technical Manual and Illustrated Parts List - Publication Part No.
V3851-4990.This is obtainable from Vinten Radamec or your local Vinten Radamec distributor. For information
on-line, visit our website at
www.vintenradamec.com
WARNING! 1. Do NOT attempt to use this product if you do not understand how to
operate it.
2. Do NOT use this product for any other purpose than that specified in the
Usage statement above.
3. This product has been designed for indoor use. Protect from water, mois-
ture and dust.
4. This product is intended for use on a flat, level studio floor surface.
5. Maintenance beyond that detailed in this Operators Guide must be per-
formed only by competent personnel in accordance with the procedures
laid down in the Technical Manual.
6. This product has basic insulation only (class I) and for safety requires an
earth connection ('ground' in the U.S.A.).