Vinten Radamec Fusion FH-145 - Manual (Page 21)

FH/FHR-145 Pan and Tilt Head
General Notices
Compliance
Installation Guide
General Purpose Connector (GP I/O)
Declaration of Conformity
Limited declares that this product has
been manufactured in accordance with BS EN ISO
9001:2008 and is in compliance with the essential
requirements and other relevant provisions of the
Machinery Directive 2006/42/EC. A copy of the Declaration of
Conformity is available upon request.
Vitec Videocom
Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC)
This symbol marked on the product or its packing
indicates that this product must not be disposed of
with general household waste. In some countries or
European Community regions, separate collection
systems have been set up to handle the recycling of
electrical and electronic waste products.
By ensuring this product is disposed of correctly you will help
prevent potentially negative consequences for the environment
and human health. The recycling of materials helps conserve
natural resources.
In countries outside the EU:
Dispose of this product at a collection point for the recycling of
electrical and electronic equipment according to your local
government regulations.
Visit our website for information on how to safely dispose of this
product and its packaging.
19
The GP I/O connector (see page 14) can be
configured and enabled in ICE Tool. It can be used to connect a
Camera Control Unit (CCU) or for powering auxiliary devices.
The pinouts for the connector are given in the table below.
26-pin, female
CAUTION! Total power drawn from the 12V pins of this
connector must NOT exceed 30W.
Pin No. Description Pin No. Description
1 Not connected 14 Not connected
2 Aux GND 15 CCU TXD422
3 Aux +12V 16 CCU TXD232
4 Aux +12V 17 Not connected
5 Not connected 18 GP I/O 1
6 CCU RXD422 19 GND
7 CCU RXD232 20 Aux GND
8 GP I/O 3 21 Aux +12V
9 GP I/O 0 22 Not connected
10 GND 23 CCU TXD422
11 Aux GND 24 CCU RXD422
12 Aux GND 25 Not connected
13 Aux +12V 26 GP I/O 2