Vintage Cellars 695-064 Sonoma - Manual

Page 1 of 2
R
695-064 Sonoma
Wine & Bar Cabinet Set-up Instructions
1. Adjust the (4) levelers on the bottom so that they are all the way screwed in. This will require (2) people; one to
tip the cabinet and the other to turn the levelers in by turning them clockwise. Otherwise lay the cabinet on its
back to make sure the levelers are in all the way.
2. Verify that the area where the cabinet is to be placed is flat and level. An uneven floor will make it more difficult
to adjust the cabinet. Place the cabinet in the location it is going to be used. Note that a tack strip used in
carpeting along the wall might effect the leveling of the cabinet.
3. To align the door gap at the top, press up on either the left or right pediment molding at the top. The door
alignment will either get better or worse. If it gets better, lower the leveler on the front corner that was pushed up
by turning it counter-clockwise. This will require (2) people.