Vintage Cellars WineKoolR - Manual (Page 8)

8
The thermo pane glass door offers superior thermal insulation; yes, it is costly compared to
simple glass, but we think it is worth the extra cost.
Caution: Please take extra care during handling, usage and cleaning!
In case breakage occurs in shipping or handling use protective gloves to prevent any injury.
Do not use harsh chemicals or abrasives when cleaning or wiping it. Simply wipe it with a soft
damp cloth.
Test the WineKoolR unit before installation.
Rest the unit on a horizontal surface for at least two hours for the compressor oil to drain to the
bottom of the compressor before powering on.
Before installation run a table top test for at least 10 minutes. Monitor the unit during the test run!
The display should light up, the air flow has to start within a minute and the compressor will follow
in the next minute. The “warm” side will exhaust warm air and the “cold” side will exhaust cool air.
Record your serial number located on the side of the unit.
Prepare the space for assembly
To work comfortably you will need an area of 13 ’x 6’.
Note: A soft surface is strongly advisable to prevent damage to the cabinet by scratching!
WineKoolR assembly and cooling unit installation
Follow the attached ASSEMBLY and OPERATION MANUAL step by step.