Vintage Cellars N'FINITY PRO HDX RED Wine Cellar - Manual (Page 7)

(b) Display Window
SET TEMP. Set temperature of the wine cellar.
REAL TEMP. Actual temperature of the wine cellar.
or Your temperature display can be set to the off position for a less obtrusive appearance. Your wine
cellar will continue to run, but the wine cellars temperature will not be visible. You can check the temperature of the
wine cellar by pressing the button.
To set the temperature display to either on or off, press °C/°F button for 5 seconds while the control panel is locked.
Once the ON/OF indicator flashes, press °C/°F a second time to the enter into the option interface. “ON” will show
the temperature at all times while “OF” will turn off the temperature display. Leave the control panel untouched for 5
seconds to confirm your option.
Note:
Temperatures may fluctuate depending on whether the interior light is ON or OFF and depending on the position of
the bottles.
Before you start:
The wine cellar should be placed in a location where the ambient temperature is between 60-80
° Fahrenheit. If the
ambient temperature is outside this range, the performance of the unit may be affected. For example, placing your unit in
extreme cold or hot conditions may cause interior temperatures to fluctuate.
(c) Temperature for Serving Wine
Although optimal storage temperature is generally regarded to be 53-57°F, different varietals of wine have
different recommended serving temperatures for optimal taste. The recommended temperature ranges for
serving different varietals of wine are listed below.
• Red Wines:
60-66°F
• White Wines
45-52°F
• Sparkling Wines 40-45°F
Note:
 If the unit is unplugged, loses power, or is turned off, you must wait 3 to 5 minutes before restarting.
Attempting to restart the wine cellar before this time has elapsed may prevent the wine cellar from starting.
 When you use the wine cellar for the first time or restart the wine cellar after having been shut off for a long
time, there will be a few degrees variance between the temperature you select and the one indicated on the
LED readout for the first few hours of operation. After a few hours of operation, the temperature will
normalize to the displayed temperature.
DOOR LOCK
 This unit comes with key lock.
 The keys are located inside the plastic bag that contains the user manual. To unlock the door, insert the key into
the lock and turn counter clockwise.
 To lock the door, simply reverse the operation making sure the metal pin is engaged completely. Then remove
7