Canon CanoScan 8800F - Manual (Page 6)

Preparing the Scanner
4
Preparing the Scanner
Unlocking the Scanner
1
Peel the shipping tapes off the scanner.
2
Open the document cover and slide the lock switch toward the unlock mark ( ).
Connecting the Scanner
1
Connect the scanner to your computer with the supplied USB cable.
2
Connect the supplied power cord to the AC adapter.
3
Connect the AC adapter to the scanner.
4
Plug the power cord into the electrical outlet.
5
Press ( ) to turn the power on.
• Handle the scanner with both hands. Be careful not to drop the scanner.
• When you carry or transport the scanner, make sure to slide the lock switch toward the lock
mark ( ) to fasten the scanning unit.
• Only use the USB cable, AC adapter, and the power cord provided with the scanner. Use of
other cables or adapters may lead to a malfunction.
• Always attach the AC adapter to the scanner before plugging in the power cord to the
electrical outlet. Reversing this order may lead to malfunctions.
• When the scanner is connected to the USB 1.1 port and "HI-SPEED USB Device Plugged into
non-HI-SPEED USB Hub" message appears, ignore the message. The scanner operates in
this condition without problems.
Unlock Mark