General handling precautions, Setup and operating conditions, Fcc notice (u.s.a. only) – Canon CanoScan 8800F User Manual
Page 2: Caution, Warning
• Microsoft is a registered trademark of Microsoft Corporation.
• Windows is a trademark of Microsoft Corporation, registered in the U.S. and other countries.
• Windows Vista is a trademark of Microsoft Corporation.
• Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
• Adobe and Photoshop Elements are either registered trademarks or trademarks of Adobe Systems Incorporated in the
United States and or other countries.
•
©
ArcSoft, Inc. All rights reserved for PhotoStudio.
• Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies.
FCC Notice (U.S.A. Only)
For 120V, 60Hz model
Model Number : K10301
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or
modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042
1-516-328-5600
Warning
When you use this product, you should pay attention to the following legal issues:
• Scanning of certain documents, such as bank notes (bank bills), government bonds and public certificates, may be
prohibited by law and may result in criminal and/or civil liability.
• You may be required under law to obtain authorization from a person possessing copyrights or other legal rights to the
item being scanned.
If you are uncertain of the legality of scanning any particular item, you should consult your legal adviser in advance.
CAUTION
• Do not plug the AC adapter and the power cord into outlets with voltages other than the specified
voltages. Incorrect voltages may result in fire or electrical shock.
• When unplugging the AC adapter and the power cord, always pull on the main body. Pulling on the
cord may damage the wires and lead to fire or electrical shock.
• Do not place objects around the AC adapter and the power cord in case it needs to be unplugged
during emergencies.
• Unplug the AC adapter and the power cord from the outlet at least once a year and clean the area
around the base of the AC adapter’s metal pins to ensure that all dust is removed. If dust
accumulates in this area, it may result in fire.
General Handling Precautions
WARNING
• Do not take apart or modify the scanner. Fire or electrical shock may result from improper handling of
its components.
• If you hear unusual noises, see smoke, feel excessive heat or smell anything unusual, immediately
unplug the AC adapter and the power cord. Then contact your retailer or Canon Customer Support
Help Desk. Continued use of the scanner may result in fires or electrical shock.
• Do not use flammable sprays near the scanner. Also do not spill water, liquids, or flammable liquids
on the scanner. If these fluids enter and contact the inner electrical parts, fire or electrical shock may
result.
• When cleaning the scanner, always unplug the AC adapter and the power cord. Damp a cloth with
water and wring the cloth well. Do not use flammable liquids such as alcohol, benzene or thinners. If
a flammable liquid enters the inner electrical parts, fire or electrical shock may result.
If anything enters the scanner, immediately unplug the AC adapter and the power cord. Then contact
your retailer or Canon Customer Support Help Desk.
CAUTION
• Do not place items that weigh 4.4 lbs. (2.0 kg) or more on the document glass. Also, do not press
heavily (i.e., more than 4.4 lbs. (2.0 kg)) on the document cover or the document glass. The
document glass may break and cause personal injury.
• Do not bump the document glass or drop heavy books or objects on it. The document glass may
break and injure you.
• When not in use for extended periods, unplug the AC adapter and the power cord for safety.
• When transporting the scanner, be extremely careful. Dropping it could cause injury.
• Wait until the scanner has cooled before placing a cover over it. Otherwise fire may result.
• Do not use the supplied CD-ROM in regular CD players. It produces excessively loud sound that may
cause hearing damage.
Setup and Operating Conditions
• Do not set up in areas where there are excessive fluctuations in temperature. Also do not move the
scanner from low-temperature areas to high-temperature areas. Condensation may cause image
errors. Leave the scanner enough time to gradually adapt to the new conditions before use.
• Do not place the scanner in areas subject to direct sunlight or strong room light. It may cause
damage to the scanner or decrease image quality. If you have to place it in direct sunlight, make sure
to use a thick curtain to block the light.
• Leave enough space (approximately 8 in. (20 cm)) around the scanner when setting up.
Safety Precautions