Vintage Cellars RR-U-5H-8C EcoWineracks - Manual (Page 2)

Attach Right End Ladder to Support Bars Attach Center Ladders Attach Left End Ladder
Attach all but 1 Spacer Bar Final Assembly for stand alone unit. Final Assembly for joining Upper and
Lower Wine Racks.
For more information or to view our assembly video visit us at www.sustainablewinecellars.com
First apply pre-glued Join
strip to the lower rack, then
slide the top rack forward to
engage pins.
Second, secure the rear spacer
bars of both racks using small
finish nails. Pre-drill nail holes
to prevent splitting.
Reveal Display Rack
OR
Step 1 Step 2 Step 3
Step 4 Step 5 Step 6
Drops of glue in each
Connector hole
DO NOT attach a bottom spacer bar to
this position at this time.
Drops of glue in each
Connector hole.
For stand-alone rack, attach
pre-glued spacer bar here.