Vetter Docking tent - Manual (Page 6)

Vetter Medical Tents
Page 5/12
4.4 Docking from door to door
The other option for connecting the medical tents to each other
takes place from door to door. An addition collar around the door
opening exists on all medical tents. These collars will be connec-
ted by using zippers.
The doors can then be rolled up in order to keep the passage open
or they can be closed in order to be able to independently use the
connected tents, as you choose.
4.5 Deflation
The deflation of the support frame happens over the inflation
connection. To deflate the tent, close the air source (compressed
air cylinder, etc.) and disconnect the pressure reducer or the filling
hose of the blower. The deflation valve is opened by pressing-in
and turning the pin (1) counter clockwise.
1
Pin before locking Pressing-in + turning Valve open
Fold the tent in the way, that the air can escape (Folding to the
direction of the inflation connection). Any remaining air can be
removed with a vacuum adaptor (Item No.: 1700018300) in com-
bination with an construction-site compressor adaptor (Item No.:
1600012000).