Vetter Docking tent - Manual (Page 11)

Page 10/12
7. Repair Instructions
Minor damage such as cracks, cuts, or punctures (max. 4 cm) can be repaired by the operator with the enclosed
repair kit. Please follow these steps:
1. Select the size of the patch so that the patch extends approx. 4 cm beyond the damaged area on all sides.
2. Mark patch area on the supporting frame.
3. Roughen the area of the patch on the surface of the supporting frame as well as one side of the patch.
4. Apply a thin layer of the special adhesive to the roughened spot on the supporting frame and the roughe-
ned side of the patch.
5. Allow special adhesive to dry for approx. 10-15 minutes until no longer sticky.
6. Press patch firmly onto the pretreated area of the supporting frame and smooth out.
7. Allow unpressurized supporting frame to rest for at least 48 hours.
Only the factory is able to repair damage that is more extensive.
A trained technician must check the tent and its supporting frame for leaks after the repairs.
8. Technical data
Type MT 20 MT 30 MT 40
Article No. PREMIUM set with
PU tent tarpaulin
1523027400 1523027500 1523027600
Article No. BASIC Set with PU tent tarpaulin
(without window/net, only 2 duct openings)
1523027900 1523028000 1523028100
Usable Area
m² 20 30 40
sq.ft. 216 324 432
Number of possible beds 6 8 12
Erection time, ca. sec. 120 180 240
Exterior size (L x W x H)
cm 370 x 593 x 324 550 x 593 x 324 730 x 593 x 324
ft 12 x 19 x 11 18 x 19 x 11 24 x 19 x 11
Interior size (L x W x H)
cm 370 x 534 x 294 550 x 534 x 294 730 x 534 x 294
ft 12 x 18 x 10 18 x 18 x 10 24 x 18 x 10
Air requirement
l 3,052 4,566 5,851
cu.ft. 108 161 207
Pack size
cm 110 x 85 x 60 110 x 85 x 60 110 x 85 x 85
inch 43 x 33 x 24 43 x 33 x 24 43 x 33 x 33
Weight BASIC, ca.
kg 74.5 107.5 156.5
lbs 164 237 345
Weight PREMIUM, ca.
kg 76 110 160
lbs 168 243 353