Installation – Universal Remote Control (URS) TRF-ZW1 7.9.14 User Manual
Page 7
5
TRF-ZW1 E
XTENDER
Installation
Connect the supplied Ethernet cable to the TRF-ZW1’s
network port and to an open connection port on your router
or network switch.
Connect the 12V power adapter to the TRF-ZW1’s power port
and plug into an electrical outlet.
The LED indicators, Power, Ready and Network illuminate
when powered. Wait for the LEDs to remain lit; this may take
up to 2 minutes. When the lights are solid, the TRF-ZW1 is
properly connected to the network.
Open a browser and type in
Create an account for access to the TRF-ZW1 Dashboard. The
online interface will discover the TRF-ZW1 and open its
Dashboard. Refer to the TRF-ZW1 Dashboard and Account
Setup
section for further details.