Universal Remote Control (URS) Mobile for iOS v2 - Manual (Page 22)

Page 17
URC M
OBILE
Using the Rooms Menu
The Rooms Menu (see picture below) is shown when the Rooms
button is pressed. This allows access and control of the rooms
programmed by your URC Professional Installer.
The Rooms Menu is used to:
• Monitor the status of any rooms in the URC project.
• Control any other room in a URC project.
Note: This is dependent upon the programming done by the
URC Professional Installer.
**The following feature is ONLY available for Total Control systems
using compatible audio products.
• Link Rooms allows all the linked rooms to listen to the same
audio source and combine the volume commands into a single
interface. The rooms will no longer be linked when the system
is turned OFF.
Room List Buttons
• Each room listing contains an associated box and action
buttons (links, options.)
• The Exit button returns the user to the last screen used.
• Selecting a room name allows for control of that room
(See
Selecting a Room below).
Links
Room list
Options Rooms
Menu
Exit