Universal Remote Control (URS) TKP-7000 - Manual (Page 15)

Page 12
TKP-7000
Rooms Menu
The Rooms Menu is the “landing” screen for a TKP-7000. This menu
(see picture below) will be displayed whenever the keypad reboots,
loses/regains power or is reset. The most common choice would be
to select the room where the TKP-7000 is physically located,
however, as we will discover, this is up to the user.
The Rooms Menu is used to:
• Temporarily Link rooms in a Total Control DMS system. This
allows all of the linked rooms to listen to the same audio source
and join the volume commands into a single interface.
• Monitor the status of other rooms in the Total Control project
• Control any other room in a Total Control project as if it were a
keypad in that room. This is dependent upon the programming
done by the custom integrator.
Room List Buttons
• Each room listing will have an associated box and action buttons.
• The Exit button will return the user to the last screen used
• Selecting the room name will allow for control of that room (see
Selecting a Room)
Links
Rooms Options