Universal Remote Control (URS) MX-3000 - Manual (Page 8)

MX-3000 C
OLOR
T
OUCH
S
CREEN
Displaying the Settings Screen
You can adjust the settings of the
MX-3000 whenever you like by pressing
and holding the MAIN button for five
seconds. When you do, the screen will
change to the SETTINGS screen. If you
do not press any button on the
SETTINGS screen within 30 seconds, the
MX-3000 will time out and automatically
return to normal operation.
Adjusting Backlighting
If you uncheck the check boxes, the
MX-3000 will stay lit until the
battery is exhausted. If you check the check
boxes, you can select from the list of delays.
The amount of delay you select will be the
how long the MX-3000 stays lit. You can save
battery life this way.
Adjusting Brightness
Simply touch and drag the brightness slider to
the desired level. Increased brightness does
affect battery life.
Button Light Settings
You can opt to conserve battery life by
disabling the LED lighting behind the
buttons.
This is done by pulling down the list box and
selecting “always off” from the list.
The Settings Screen
The Backlight Screen
The Brightness Screen
The Button Light Screen
Page 5