Universal Remote Control (URS) MX-5000 - Manual (Page 14)

Page 11
MX-5000 T
WO
W
AY
T
OUCH
S
CREEN
Calibration
If you like, you can calibrate where you tap by running the calibra-
tion. You will need a pen top or PDA stylus to do this. Do not
attempt to calibrate using your fingers.
Date and Time
Your MX-5000 may have been programmed to
display the date or time on the touch screen. If
you need to, you can adjust the time displayed by
changing the settings on this screen. If you live in
a part of the country that uses daylight savings
time, check the box next to: "Automatically adjust
time for daylight savings time".
Sound
You can adjust the volume or touch vibration to any level you like
by touching and dragging the volume control.
Pickup Settings
You can set your MX-5000 to only turn on when touched, or every
time you move it. Simply select on or off. The pickup sensitivity can
be adjusted with the slidebar.
Factory Default
WARNING! Only use this button when instructed to by Technical
Support. It resets the memory of the MX-5000 to the factory condi-
tion. All your programming will be lost!
Exit
When you have finished adjusting Settings, simply tap the EXIT but-
ton to return to normal operation.