Universal Remote Control (URS) MX-1200 - Manual (Page 9)

Page 6
MX-1200 C
OLOR
T
OUCH
S
CREEN
Button Light
You can adjust the brightness of the LEDs that
backlight the buttons of the MX-1200. Move the
slider to the left to dim or move it to the right to
brighten the backlighting.
Date and Time
Your MX-1200 may have been programmed to
display the time or date on the touch screen.
If you need to, you can adjust the time displayed
by changing the settings on this screen.
Calibration
If you like, you can calibrate the screen by running
the calibration setting. You will need a pen top or
PDA stylus to do this. Do not attempt to calibrate
using your fingers.
Pickup Settings
You can set your MX-1200 to only turn on when
touched, or every time you move it. Adjust the
Pickup Sensor Level by sliding the bar to the
desired percentage.