Universal Remote Control (URS) MXW-920 - Manual (Page 12)

Page 9
MXW-920 O
WNER
’
S
M
ANUAL
Learn commands
Transfer commands from a component remote to the MXW-920
using the Learn feature.
Erasing learned data
Remove any unwanted learned commands from the remote.
Performing a Factory Default
Device - Copy a command to a device
button.
Button - Copy a command to a button
within a device.
To exit, press Main.
Button - Erases a specific command resid-
ing on a button within a device.
DevBtn - Removes any learned commands
on a device button label such as
Cable.
Device - Erases all learned commands for
one device.
All - Erases all learned data on the remote.
To exit, press Main.
WARNING: DO NOT PROCEED
UNLESS SPECIFICED BY YOUR
CUSTOM INSTALLER! THIS
SECTION WILL ERASE ALL DATA
ON THE REMOTE.
Pressing Yes will format the remote’s disk
and set it back to the factory settings.
To exit, press No or Main.