Universal Remote Control (URS) MX-900 - Manual (Page 5)

Page 2
MX-900 O
WNER
’
S
M
ANUAL
Optional RF “No Rules” Operation
In combination with a Complete Control RF Base Station, the MX-900 can
control your system without being in line-of-sight of the equipment.
3.
The MRF-300’s built-in Front Blaster sends commands to
components in the same cabinet space as the MRF-300.
4.
Self-adhesive “Flashers” affix to the
Infrared sensors on the front panels of
your components. The Flashers relay
commands to components out of sight of
the MRF- 300’s Front Blaster. The flashers
plug in to the MRF-300’s rear flasher line
outputs via their 10 foot cables.
Uniquely, the MRF-300 can also connect
to rear panel IR Inputs via its adjustable
IR Line Outputs.
2.
The RFX-150 RF Sensor can be freely
positioned for optimal reception.
Either the MRF-300 or the MRF-250 RF base station is compatible with the
MX-900. Both incorporate RF addressing. RF Addressing gives you the
ability to control equipment locations throughout your home, even if they
are concealed in other rooms or are behind closed doors.
1.
The MX-900 sends radio waves
in every direction, so you
don’t have to point the
remote any-more!