Percent weighing – Torbal AD50 Quick Reference Guides User Manual
Page 7

AD Series: Quick Reference Guide
Percent Weighing %
Before using this reference guide, enable and configure Percent Weighing by following the steps listed in Chapter 7.1.3
of the Instruction Manual. To enter the Percent Weighing mode press the F key, and select the function by pressing the
“T” key while “Percent” is displayed.
1. Place a container on the pan and tare it by pressing the “T” key.
2.
The scale will display the weight of a previously stored sample. To accept the current sample setting, press the
“T” (YES) key and skip to step 5. To assign a new sample, press the 0(NO) key.
3. Place the sample on the pan.
1