Tjernlund VP-2F, VP-3F (Old Style Honeywell Timer) 8504140 User Manual
Page 15
VENT HOOD MOUNTING TEMPLATE FOR VP-2F & VP-3F
1. Use scissors to detach template. Verify “Vent Hood Installation Clearances” on page 5 are adhered to. Attach the Vent Hood
Mounting Template to the interior of the wall the vent hood will be penetrating.
2. Verify that wall penetration will not come in contact with concealed wiring or plumbing. Use VH1-3 template for the model VP-2F
and VH1-4 template for the model VP-3F. Using a 1/2” drill bit, drill two pilot holes where noted on the template. The drill bit
must be long enough to penetrate to the building exterior.
3. Attach the template to the building exterior aligning the pilot holes on the template with the pilot holes drilled in step 2.
4. Using a reciprocating saw, cut an opening through the building siding, wall board, etc., following the appropriate lines of the template.
5. Slide the Vent Hood through the opening and fasten to exterior wall using provided screws.
6. Once Power Venter is completely installed and secured, apply a bead of exterior rated caulk between Vent Hood flange and
exterior of building.
14
CUT OUT THIS SQUARE IF INSTALLING THE VP-3F (VH1-4” VENT HOOD)
CUT OUT THIS SQUARE IF INSTALLING THE VP-2F (VH1-3” VENT HOOD)
VH1-3 ROUGH-IN
6 3/4” Sq.
VH1-4 ROUGH-IN
8” Sq.
- 950-0014 Relay Timer Airotronics Non-Adjustable 8504067 Rev. A 11/11 (2 pages)
- 950-0014 Relay-Timer (Old Style) Kit Non-Adjustable 8504067 Rev. 10/97 (2 pages)
- 950-0015 SS2 Motor Kit 8504069 Rev. 05/98 (2 pages)
- 950-0017 SS2 Impeller Kit 8504070 Rev. 03/98 (1 page)
- 950-0019 SS2 Venter Housing Kit 8504072 Rev. 05/98 (1 page)
- 950-4020 I, IL, XL Motor Kit 8504051 Rev 2 11/96 (2 pages)
- 950-0452 PAI-1,2 Prover Kit 8504044 Rev. 1 04/97 (2 pages)
- 950-0453 PAI-T Timer-Clock Kit 8504045 Rev. 1 05/97 (2 pages)
- 950-0476 Commercial PAI Series Fan Prover Kit 8504086 Rev. A 01/00 (1 page)
- 950-0484 Mac-3 (Discontinued - No longer available) Board Kit 8505009 Rev. 08/00 (9 pages)
- 950-0625 SS1 Motor Kit 8504016 Rev. A 11/99 (2 pages)
- 950-0640 SS1 Series High Limit Kit 8504042 Rev. 2 03/98 (1 page)
- 950-0740 SS1C Series High Limit Kit 8504042 Rev. 2 03/98 (1 page)
- 950-0750 SS1C Fan Prover Kit 8504037 Rev. 09/94 (1 page)
- 950-1007 Fan Prover Kit 8504113 (1 page)
- 950-1020 Motor Kit 8504048 Rev 2 12/97 (2 pages)
- 950-1021 Motor Kit 8504049 Rev 2 11/96 (2 pages)
- 950-1022 Motor Kit 8504050 Rev. 1 11/96 (2 pages)
- 950-1040 24V Relay Kit 8504052 Rev. 3 10/97 (2 pages)
- 950-1067 Relay-Timer Airotronics - Adjustable 8504053 Rev. A 04/12 (4 pages)
- 950-1067 Relay-Timer (Old Style) Kit 8504053 Rev 4 09/96 (4 pages)
- 950-2043 ND-1 Post Purge Burner Kit 8504004 Rev 0196 (4 pages)
- 950-2061 Pilot Saver Kit 8504028 Rev 2 09/95 (2 pages)
- 950-2064 L-185 Safety Interlock Kit 8504020 Rev 3 09/96 (2 pages)
- 950-2080 New Style Gas Pressure Switch (1 page)
- 950-2420 24SP200 Spillage Kit 8504056 Rev 1 03/97 (2 pages)
- 950-3022 Motor Kit 8504066 Rev 1 05/98 (3 pages)
- 950-4030 AD-1 Speed Controller Kit 8504005 Rev 03/96 (1 page)
- 950-8804 UC1 Universal Control Board Kit (Version X.06) 8505017 Rev D 07/05 (17 pages)
- 950-8804 UC1 Universal Control Board Kit (Version X.04) 8505017 Rev A 05/03 (16 pages)
- SB1 Heat Shield Kit 8504184 (2 pages)
- DJ-3, D-3, HD, I, IL, XL Draft Inducer 8504003 Rev A 07/00 (12 pages)
- PS1505 Fan Prover 8504008 Rev 1 01/97 (2 pages)
- AD-1 for Wood or Coal Stoves 8504012 Rev A 10/99 (2 pages)
- CSA1 Chimney Stack Assist Kit 8504201 (8 pages)
- RTS8 Rooftop Mounting Kits 8504161 (1 page)
- COP2 Constant Operating Pressure Exhaust Control 8504208 (11 pages)
- CIC1 Heater Interlock Control for COP2 8504209 (2 pages)
- DCOP1 Constant Operating Pressure Draft Control 8504174 (Discontinued) (20 pages)
- XCOP1 Constant Operating Pressure Exhaust Control 8504175 (Discontinued) (7 pages)
- UCRT Rooftop Inducer Universal Control (Version X.06) 8504162 Rev A 05/11 (16 pages)
- UCRT Rooftop Inducer Universal Control (Version X.06) 8504162 Rev 01/10 (16 pages)
- MAC1E Control Version F (Compatible with UC1 Control) 8504110 Rev B 11/05 (2 pages)
- MAC1E Control (Compatible with UC1 Control) 8504110 Rev A 12/04 (2 pages)
- MAC4E Control Version F (Compatible with UC1 Control) 8504112 Rev B 08/05 (2 pages)