Thetford DC0788 Series - Manual (Page 9)

9
6. Move the latch to the opposite side of
the door (See Art01514):
- Remove the screw that attaches the
hinge insert to the door.
- Remove the hinge insert, the latch
handle, and the coil spring from the
door.
- Pull the latch handle pin out of the
recess in the latch handle.
- Move the latch handle pin to opposite
side of the latch pin (See Art01515).
- Turn the latch handle upside down and
push the latch handle pin into the
recess of the latch handle.
- Make sure the angled top faces
the door latch plate.
- Assemble the coil spring, the latch
handle, and the hinge insert into the
opposite side of the door.
- Install and tighten the screw that
attaches the hinge insert to the door.
7. Put the door onto the refrigerator
8. Install and tighten the two (2) screws
that attach the door hinge to the bottom
of the refrigerator.