beautypg.com

Installation – Thetford DC0788 Series User Manual

Page 6

background image

6

Installation

The refrigerator should be located and secured on a solid surface in the vehicle.

Before installing the refrigerator into the opening, make sure the DC supply is properly
connected. In many cases, the DC supply can be connected from outside the vehicle
by means of the baggage or access door.

Measure the opening to determine if you have proper clearance for installation.
Additional insulation space around the refrigerator is not necessary.

Check the Battery charge Level

A fully charged battery will have a specific gravity reading of between 1.260 and 1.280. The
battery voltage is best indicated when the refrigerator is “ON” and the battery charging sys-
tem is “OFF”. Charge the battery when the specific gravity reading is less than 1.200.

For your reference

The wiring diagram shown below is recommended for dual battery hookup (See
Art01516)

.

*Recommended source:
Sure Power Industries, Inc.
1-800-845-6269
www.Surepower.com

This manual is related to the following products: