Thetford DC0788 Series - Manual (Page 8)

8
2. Remove the panel retainer by removing
the two (2) screws that attach the panel
retainer (See Art01511).
3. Gently pull the door panel out of the
door (Art01512).
4. Push a new door panel into the door
slot.
CAUTION: Do not overtighten the
screws and bolts.
5. Put the panel retainer in the original
location and attach with two (2) screws.
6. Put the door in the original location and
tighten the two (2) bolts.
Reverse the door swing:
1. Remove the door from the refrigerator
by removing the two (2) bolts that attach
the door hinge to the bottom of the
refrigerator
2. Remove the two (2) bolts that attach the
upper hinge.
3. Remove the bolt that attaches the door
latch plate to the top of the refrigerator
(See Art01513).
4. Remove the upper hinge and the door
latch plate from the refrigerator.
5. Attach the upper hinge and the door
latch plate to the opposite sides of the
refrigerator.
Door latch plate
Bolts
Art01513