Char-Griller 5050 - Manual (Page 18)

Step 24
Install Igniter battery by turning the Igniter push button cap counter-clockwise until the igniter button
detaches, then install a AA battery making sure the positive(+) end is under the push button. Then
re-attach the igniter button by turning it clockwise. Press the igniter button and make sure all 3
igniters that are attached to the burner tubes are creating a spark.
Step 25
Tighten ALL BOLTS and NUTS.
Fully Assembled
Caution: Use only the regulator provided!
If a replacement is necessary, please call our customer service department, 912-638-4724. Do NOT use
replacement parts that are not intended for this grill.
page 18
™ & © 2006 Char-Griller / A&J Mfg.
Hint: The paper label that is affixed to the hood is more easily removed when the hood is warm. Any
remaining glue residue can be cleaned off with a spray lubricant like WD-40 . Do NOT use any other type of
solvent or cleaner because this will damage the finish/paint/coating on the grill.