Char-Griller 5050 User Manual

Page 14

Text mode
Original mode

Step 12
Install the SIDE DAMPER to the CHARCOAL GRILL BODY using one (1) ½” BOLT. The
BOLT should first go through a FLAT WASHER then the DAMPER then the GRILL BODY
then another FLAT WAHSER then a LOCK WASHER and then secured with a HEX NUT.
See below

See below.

Nut

L k W h

Damper

Step 13

Lock Washer

Flat Washer

Bolt

Step 13
Attach the SIDE HANDLE to the right side of the CHARCOAL GRILL BODY using two (2) ½”
BOLTS and two (2) LOCK WASHERS as shown. From inside the GRILL BODY insert each
BOLT through a LOCK WASHER and then through the GRILL BODY and then screw into
the SIDE HANDLE. See below.

Lock Washer

Step 14
Attach the HOOD HANDLES to the GRILL HOODS with four (4) LOCK WASHERS and four (4)
WING NUTS as shown below.

Lock Washer

page 14