Clarion UNGO MS5500 - Manual (Page 29)

MS5500 Installation Manual - Page 25
The following are some suggested uses for the programmable Auxiliary Function 2 Output.
Tech Tips
Remote Control of Audio System
(Latched Operating Mode)
This enables the user to listen to the vehicle’s
audio or video system for extended periods
without need of the vehicle’s ignition key.
When the Aux 2 function is pressed, the radio
will turn on until either the Aux 2 function is
pressed again, or the user arms the alarm. In
this manner, the user cannot forget to turn off
the radio and drain the vehicle’s battery.
Normal operation of the audio system using the
ignition key is unaffected.
Radio
Ignition Wire
Radio
Memory Wire
Yellow/black Wire
Aux Function 2
Output
CUT
To Vehicle Radio Wiring Harness
Yellow/black Wire
Aux Function 2
Output
To Vehicle Headlight Switch
CONNECT
TO +12V
Remote Headlight Activation
(Timed Operating Mode)
This enables the user to conveniently light the
path to their door for nighttime safety.
When the Aux 2 function is pressed, the
vehicle’s headlights will turn on for 30 seconds,
then turn off.
installation_MS5500.qxd 12/6/99 11:59 AM Page 25