SINGER ESP18 ELECTRONIC STEAM PRESS - Manual (Page 6)

4
10. The Steam Light illuminates once the unit is ready to produce bursts of steam,
providing you with a clear visual indication that you can begin using the Steam Burst
Buttons.
11. The Temperature Control Buttons are pushed to select a desired temperature,
press (+) Button to select the setting with higher temperature, and press (-) button to
select the setting with lower temperature.
12. The Temperature Digits twinkles when the unit is heating up. It stops glittering when
the temperature of Pressing Plate reach the selected temperature range. And it
indicates that you are ready to press.
13. The Measuring Cup is designed to assist you in easily filling the Water Reservoir with
water.
14. The Spray Bottle allows you to moisten fabrics before pressing, which helps to make
the pressing process easier and more effective in certain instances.
15. The Pressing Cushion is a fabric--covered pad used for press gathered or
contoured areas such as sleeves, darts, yokes.
16. The LED Display provides you with a clear visual screen for the working status of the
steam press.
ABOUT THE AUTO SHUT-OFF
The Auto Shut- Off feature includes both an Auto Shut- Off and an Auto Wake-Up .These
multiple function safety features deactivate electrical power to the heater when the
Pressing Plate has been left closed against the Ironing Board for more than 10 seconds.
Heater deactivation is signalled by a beeping sound. Heater Functionality is restored
when the Pressing Plate is raised back up. Power to the heater will also be cut if the
Pressing Plate is in the raised position without use for approximately 15 minutes(once
again signalled by a beeping sound) The heating ability of the unit can only be restored in
this situation by pressing the Temperature Control Buttons.
IMPORTANT: Auto Shut- Off does not mean that power to the unit is totally cut off.
Power is always on, and the Power Indicator Light will Remain illuminated until On/Off
Switch is set to “Off” position.
FEATURES OF THE DIGITAL STEAM PRESS
Your Steam Press provides clean, professional results every time!
- Pressing surface is ten times larger than most hand-held irons
- Can reduce ironing time up to 50%
- Multiple dry and steam settings, burst setting to remove stubborn wrinkles
- Variable temperature control
- Automatic shut off safety feature while open or closed with audible alert
- Power indicator light
- Protects delicate fabrics like silk
IMPORTANT: For Household Use Only
Filling Instructions:
Do not plug the unit in until you have filled the Water
Reservoir
1. Place Digital Steam Press on a flat, level surface.
2. Turn Locking Knob to “Unlock” position to unlock
Pressing Plate.
3. Lift up the Pressing Handle to raise the Pressing
plate. It will automatically stay in open-up position.
4. Pull Water Reservoir out. Note that Water Reservoir
cannot be completely removed from the unit; do not
attempt to force it free.
5. Remove Water Reservoir Cap to express Water
Reservoir fill hole.
6. Using Measuring Cup(included), fill Water Reservoir
up to the MAX(300ml) line with distilled water.
7. Replace Water Reservoir Cap and push filled Water
Reservoir back into main unit.
DO NOT ATTEMPT TO PULL WATER RESERVOIR OUT COMPLETELY.
ESP18_Instruction Manual_US.indd 4 10/11/2012 6:08:55 PM