Button sewing – SINGER 7322-WORKBOOK Quantum Décor User Manual
Page 8

6
Button Sewing
Machine Set
Machine Set
Machine Set
Machine Set----Up:
Up:
Up:
Up:
Stitch:
“B”, Zigzag
Stitch Width:
Determined by button (usually 3mm)
Stitch Length:
(does not apply because feed dogs are lowered)
Feed Dogs:
Down Position
Presser Foot:
Button Sewing Foot
Materials:
Materials:
Materials:
Materials:
Home Décor fabric or shirting
(1) two-hole button
Procedure:
Procedure:
Procedure:
Procedure:
Fold fabric in half and place under foot.
Position the button on the fabric so that the holes in the button are
between the toes of the foot.
Lower the presser foot to hold the button in place.
Turn the hand wheel forward, adjust so that the needle goes into either
the right or left hole.
Adjust the stitch width dial to fine tune the swing of the needle into the
other hole.
Recheck the swing of the needle into the other hole. Now use the foot
control to stitch 6-8 stitches.
Use buttonholes and decorative
buttons for versatile and stylish
tabs on curtains.