SINGER 7322-WORKBOOK Quantum Décor - Manual (Page 3)

1
Straight Stitching, Reverse and Needle Positions Straight Stitching, Reverse and Needle Positions Straight Stitching, Reverse and Needle Positions Straight Stitching, Reverse and Needle Positions
Machine Set Machine Set Machine Set Machine Set----Up: Up: Up: Up:
Stitch: “A”, Straight Stitch
Stitch Width: 0, Center Needle Position
Stitch Length: 3
Presser Foot: Standard Foot
Materials Materials Materials Materials:
(2) 5” X 5” pieces of medium weight cotton
Procedures: Procedures: Procedures: Procedures:
Sew a straight stitch on the fabric.
Change the stitch width to 3, notice the needle position changes.
Sew another row of straight stitching.
Change the stitch width to 7, notice the needle is in the far left position.
Sew a straight stitch and compare the differences in needle position.
Sew a straight seam and practice reinforcing the seam using the
reverse knob.
Change the stitch length dial to 1, begin to sew.
Slowly move the stitch length dial to 7, notice how close or far apart the
stitches look depending on the stitch length setting.