Zippers and piping – SINGER 1748 User Manual

Page 59

Set the machine as illustrated. Dial selector on " ".

The zipper foot can be attached right or left, depending on

which side of the foot you are going to sew. (2)

To sew past the zipper tab, lower the needle into the fabric,

raise the presser foot and push the zipper tab behind the

presser foot. Lower the foot and continue to sew.

It is also possible to sew a length of cord into a bias strip to form

a "welt" or piping.

Set stitch length control between "1" -"4" (according to thickness

of fabric).

Change to zipper foot. (1)

(3)

Zippers and piping