Maintenance – SINGER 1525 User Manual

Page 71

Attention:
Disconnect the machine from the electricity supply by

removing the plug from the main socket. When cleaning

the machine, it must always be disconnected from the

electricity supply.

Turn the handwheel until the needle is fully raised. Open the

hinged front cover and unscrew the needle plate screws with

the screw driver (1).

Use the brush supplied to clean the whole area (2).

Remove the bobbin case. Snap the two hook retaining arms

(3) outwards. Remove the hook race cover (4) and the hook

(5) and clean with a soft cloth. Lubricate at the point (6) (1-2

drops) with sewing machine oil. Turn the handwheel until the

hook race (7) is in the left position. Replace the hook (5).

Replace the hook race cover and snap back the two hook

retaining arms. Insert the bobbin case and bobbin and

replace the stitch plate.

Fabric fluff and threads must be removed regularly. Your

machine should be serviced at regular intervals at one of

our service agencies.

Remove the needle plate:

Cleaning the feed dogs:

Cleaning and lubricating the hook:

Important:

Maintenance