SINGER S18 STUDIO Instruction Manual - Manual (Page 64)

64
Starting Programmed Stitch Patterns at the
Beginning
If the stitching is terminated before the end of the
programmed stitch patterns it is easy to return to the
beginning. To start at the beginning of the memorized
sequence press the memory button.
1 Programmed pattern combination sewn
2 Stitching stopped
3 Press memory button.
4 Machine sews from the beginning of
programmed stitch pattern.
Returning to beginning of incomplete stitch
pattern
When stitching out a combination a thread may break or the
bobbin thread could run empty. To start close to where the
stitching stopped select the TOM button. The machine will
return to stitching the beginning of the last pattern sewn.
5 Programmed pattern combination
6 Stop sewing
7 Press turnover memory button
8 Machine sews pattern combination at
beginning of incomplete pattern
Making a copy and mirror image of
programmed stitch patterns
Machine Settings
Stitch Pattern: 24-27 (Mode 3)
Thread tension: 3-6
Presser foot: Satin stitch foot F
Foot pressure: 2-3
Step 1
Select stitch pattern 24 and the memory button.
Select Stitch pattern 27 and the memory button.
Step 2
Press the edit button to shift the cursor under stitch
pattern 24.
Step 3
Press the memory button and a copy of stitch pattern 24
will be memorized.
Step 4
Press the help button to shift the cursor under stitch
pattern 27.
Step 5
Press the Turnover memory button and a mirror image of
stitch pattern 27 will be memorized.
1
2
3
4
5
6
7
8
1
2
5
4
3