Seca 101 - Manual (Page 6)

6 •
Using measured results WARNING!
Hazard to patient
The seca 101 PC software is not diagnostic
software. The PC software assists the attending
physician in producing a diagnosis.
► To produce an accurate diagnosis and insti-
gate therapies, the attending physician must
commission specific examinations and take
account of their results in addition to using
the
seca 101 PC software.
► The responsibility for diagnoses and the ther-
apies derived from them lies with the attend-
ing physician.
CAUTION!
Hazard to patient
To prevent misinterpretations, measured results
for medical purposes may only be displayed
and used in SI units (weight: kilograms, height:
meters). Some devices and this PC software,
too, have the option of displaying measured
results in different units. This is purely an addi-
tional function.
► Only use measured results in SI units.
► The user takes sole responsibility for the use
of measured results in non-SI units.
► Before storing and using measurements acquired
with the
seca 101 PC software (e. g. in a patient
data management system), check that these mea-
surements are plausible and correspond to the dis-
play on the measuring device.
► Once measurements have been transmitted from
the
seca 101 PC software to a patient data man-
agement system, check that these measurements
are plausible and have been assigned to the correct
patient before using them.