Seca 274 band_1 - Manual (Page 66)

66 •
Select print option
(APrt)
You can configure the length measuring rod so that
measured results are automatically printed out on a
wireless printer logged into the wireless group as soon
as the (hold/zero) key is pressed briefly.
If a set of scales from the seca 360° wireless system is
also logged into the wireless group, you can have the
BMI automatically calculated and printed out.
NOTE
This function is only available if the "learn"
function has been used to integrate a
seca wireless printer in the wireless group.
1. Switch on the length measuring device and the
scales.
2. Select the "APrt" menu item from the "rf" submenu
and confirm your selection.
3. Depending on the required print result, select the
appropriate setting for length measuring device and
scales:
4. Confirm your selection.
You will leave the menu automatically.
Set time (Time) You can configure the system so that the wireless
printer automatically adds the date and time to your
measured results. To do so, you have to set the date
and time once on the device and transmit this to the
wireless printer's internal clock.
NOTE
This function is only available if the "learn"
function has been used to integrate a
seca wireless printer in the wireless group.
1. Switch the device on.
2. Select the "Time" menu item from the "rf" submenu.
3. Confirm the selection.
The current setting for year (YEA) is displayed.
Print result
APrt length
measuring
device
APrt scales
Height on off
Weight off MA
Height, weight and
BMI
off HI_MA
No automatic
printing
off off