Sage Control Grip All In One BSB530UK - Manual (Page 18)

17
aSSEmBly & oPEratIon
to USE tHE Potato maSHEr lEg
For food preparation tips and recipes
refer to the recipes section. Ensure the
potato masher is completely and properly
assembled.
1. Place food to be mashed into a
sufficiently large mixing bowl
or container.
2. Insert the plug into a 230V power
outlet and turn the power on.
3. Select the desired setting on the
variable mashing leg.
4. Select a high speed on the speed
control dial.
5. Place the potato masher into food
and press the trigger switch to turn
the masher on.
6. Move the masher through the
ingredients with a gentle raising and
lowering action until desired texture
is achieved.
7. Switch off the motor by releasing
the trigger switch before lifting the
masher out of the bowl. Switch off
at the power outlet and remove the
power plug.
to dEtaCH tHE Potato
maSHIng lEg
Ensure the trigger switch is released, the
power is turned off at power point and the
appliance is unplugged.
Hold the motor body with one hand, and,
using thumb and finger of the other hand,
press on the two EJECT buttons on either
side of the motor body. Pull the motor body
away from the masher to detach.
rECommEndatIonS WHEn USIng
WItH tHE Potato maSHIng lEg
• Release the trigger switch and ensure
the masher has completely stopped
turning before removing the masher
from the food during operation.
• Place the mixing bowl on a damp cloth
during mashing. This will keep the
mixing bowl stable.
USIng aS a WHISK
Remove blending leg from motor body
(follow the instructions “To detach the
blending leg”).
1. Align the whisk gear box to the hole in
the underside of the motor body and
push the whisk in until it clicks and
locks into place.