Sage Smart Toast BTA820UK/BTA840UK - Manual (Page 15)

14
PAge heAder..... CAre, CleAnIng & STorAge
CAre And CleAnIng
1. Switch the toaster off at the power
outlet and then remove the power
plug from the power outlet. Allow
the toaster to cool completely
before cleaning.
2. To clean any crumbs from the
toaster, remove the crumb tray
(located under the control panel at
the front of the toaster) by pulling
it outwards. Empty and replace the
crumb tray before using the toaster
again. Replace the crumb tray by
sliding it inwards until it locks
into position.
3. To remove any additional crumbs,
turn the toaster upside down over a
bin and shake crumbs free.
4. Wipe the outside of the toaster with
a slightly dampened soft cloth and
then dry it with a soft dry cloth to
dry completely.
noTe
Do not clean with metal scouring
pads. Pieces can break off the pad
and touch electrical parts creating an
electric shock hazard.
STorAge
Switch toaster off at the power outlet and
remove the power plug from the power
outlet. Allow the toaster to cool completely
before storing. Follow the directions for
cleaning and store in an upright position
on a flat surface on a bench top or in an
accessible cupboard.
Do not store anything on top of the toaster.
WARNING
Do not use the toaster without the
crumb tray in position.
Do not allow crumbs to build up in
the crumb tray. Failure to clean the
crumb tray regularly may result in
a fire hazard.