Sage Smart Toast BTA820UK/BTA840UK - Manual (Page 12)

11
ToAST/CAnCel BUTTon
The TOAST/CANCEL button surround will
illuminate in white for up to 30 seconds
when the appliance is turned on. The
toaster will revert to stand-by mode after
30 seconds if a button is not pressed or the
browning control slide is not adjusted.
• Press the TOAST/CANCEL button
once to lower the carriage and start the
toasting process. The TOAST/CANCEL
button surround will then illuminate
in red.
• Press the TOAST/CANCEL button
during operation to cancel the toasting
process or any other functions. The
TOAST/CANCEL button illumination
will change from red to white and stay
illuminated for up to 30 seconds.
noTe
Toasting can be stopped at any time
by pressing the TOAST/CANCEL
button located on the top of the
toaster. This will cancel the operation
and the carriage will move to the
raised position.
noTe
The toaster features a QUICK LOOK ™
button. This automatically raises
the carriage without cancelling or
resetting the selected browning
setting. Use the QUICK LOOK ™ button
to view browning progress during the
toasting and, if necessary, cancel the
process when the desired toast colour
is achieved.
A BIT more ™ SeTTIng
This feature can be selected after or during
the toasting cycle.
To use this feature during the toasting
cycle:
The A BIT MORE™ button surround will
illuminate in white when selected. The
toasting time will automatically increase but
will not illuminate more of the LED toasting
progress indicator. A BIT MORE™ function
can be cancelled by pressing the
A BIT MORE™ button again and the original
toasting cycle will continue.
To use this feature after the toasting cycle
has completed:
1. The A BIT MORE™ button surround
will illuminate in white when selected.
The carriage will automatically lower
and begin the additional toasting time.
The LED toasting progress indicator
will automatically align with the lowest
browning setting then flash and count
down for the additional browning time.
2. The TOAST/CANCEL button
surround will also illuminate in red
and the QUICK LOOK™ button
surround will illuminate in white
allowing you to check on the
toasting progress and, if necessary,
cancel the cycle by pressing the
TOAST/CANCEL button when the
desired toast colour is achieved.
3. Approximately 10 seconds before
the end of the additional browning,
the QUICK LOOK™ button will
cease illumination. As the toasting
stops and the carriage rises, the
TOAST/CANCEL button surround
will flash, the LED toasting progress
indicator will cease flashing and the
A BIT MORE™ button surround will
cease illumination. The LED
toasting progress indicator will
re-illuminate to the previously
selected browning setting.
oPerATIng yoUr neW APPlIAnCe