beautypg.com

Sage Nutri Juicer Plus BJE520UK User Manual

Page 21

background image

20

PAge heAder.....

CarE & ClEanIng

Ensure the juicer is turned off by pressing

the ON/OFF button on the control panel to

OFF. Then switch the appliance off at the

power outlet and unplug the cord.
Ensure the juicer is correctly disassembled.

Refer to Disassembling your juicer.

notE

FOR EASIER CLEANING:

Clean as you go and avoid dried on

juice or pulp residue.
Immediately after each use, rinse

removable parts in hot water to

remove wet pulp. Allow parts to

air dry.
To minimise cleaning, line the pulp

container with a plastic freezer bag to

collect the pulp. Pulp can then be used

in other dishes or as compost for the

garden or discarded.

ClEanIng tHE motor BaSE

1.

Wipe the motor base with a soft,

damp cloth then dry thoroughly.

2.

Wipe any excess food particles from

the power cord.

notE

Do not use abrasive scouring pads

or cleaners when cleaning the parts or

motor base as they may scratch

the surface.

ClEanIng tHE fIltEr BoWl

SUrroUnd, JUICEr CoVEr,

nUtrI JUICEr™ PlUS InSErt,

food PUSHEr, PUlP ContaInEr

Wash all parts in warm soapy water with a

soft cloth. Rinse and dry thoroughly.

notE

The filter bowl surround, juicer cover

and pulp container are dishwasher

safe (top shelf only).
The Nutri Juicer™ Plus insert is not

dishwasher safe. Please wash in

warm water.

ClEanIng tHE JUICE dISC

For consistent juicing results always ensure

that the juice disc is thoroughly cleaned

using the supplied cleaning brush.

1.

Soak the juice disc in hot soapy water for

approximately 10 minutes immediately

after juicing is completed. If pulp is

left to dry on the filter it may clog the

fine pores of the filter mesh thereby

lessening the effectiveness of the juicer.

2.

Using the cleaning brush, hold the

juice disc under running water and

brush from the inside of the basket

to the outer rim. Avoid touching

the small sharp blades in the centre

of the juice disc. After cleaning the

juice disc, hold it up towards a light

to ensure the fine mesh holes are

not blocked. If the holes are blocked,

soak the juice disc in hot water

with 10% lemon juice to loosen the

blocked holes. Alternatively, wash

the juice disc in the dishwasher.